DYNAMITE MULTI HEX WRENCH SET

FEATURES

The handle of the Multi Hex Wrench Set is machined out of a solid chunk of aluminum that has been black anodized to enhance its look and eliminate corrosion. Knurling in the middle increases grip and gives it a good look. The hex side of the handle is made out of steel and inside is a magnet that holds onto the tip. The handle has had all the material removed from the inside to lighten it up and provide a space for the included tips. They are stored in a plastic cover that organizes them and it uses a o-ring to give it a tight fit with the handle. The tips have 1/4-inch hexes and will also work in most power drivers. All the standard and metric hex sizes used are included including one 3/32-inch ball end driver. The various sized are laser etched into the hex and shaft so you can easily identify them.

TESTING

It’s pretty nice to have a tool that has every size hex tip that you would use in the hobby and Dynamite was smart to make it accept 1/4-inch drive tips. The magnet in the handle that keeps the tip in place is a nice touch. All the tips are clearly marked and I had no issues trying to find the ones I needed for the job. The tips are well done and fit the hex in the screws very well and the handle feels good in my hand. I struggled a bit trying to get the plug out of the handle to change the tip but that’s a good thing because you don’t have to worry about them falling out.

Source

Dynamite RC: dynamiterc.com