What you need to know before fencing in a yard

Fencing in a yard seems like a simple project, right? Just hammer in a few posts, attach your fencing, and there you go. Well, that’s one way of doing it ... but it’s not the smartest.

Careful planning will save you tons of time, money and hassle once you actually install your fence. I talked with Joe Raboine, Director of Belgard Residential Hardscapes, about what you must research before fencing in your yard, and a few things to watch out for.

Bottom line, warns Raboine, is to “make sure you don’t do anything that will cost money later ... or have to be replaced!”

Laws and regulations

Ensure your plans comply with local regulations. Your homeowners association is the place to start; most require an architectural review before approving new fence plans. Interestingly, Raboine points out, “The city will usually defer to the HOA.”

If a permit is necessary for fence installation in your town, have that in hand before work begins. And find out whether underground utility pipes or

cables run where you plan to dig.

Property line

Determine your exact property line so you don’t accidentally install the fence on your next door neighbor’s turf. Refer to the plat map (if it’s less than 5 years old) or hire a surveyor. Local law might specify an additional setback of several inches to one foot.

Ground condition

Raboine comments, “Soil can play a big part in your fence planning. With new construction, you want to make sure the soil has settled. Otherwise, it should be thoroughly compacted.

“Beyond that, depending on the region of the country, you may need to reinforce the fenceposts. If the soil is very solid, like a heavy clay, often you can just pack it around the posts. But when it’s really sandy, you may have to use Sonotubes ™ filled with concrete to keep the sand from collapsing while you prepare to set the posts.

“In some areas, you’ll run into bedrock or boulders, which may require drilling or bringing in special equipment. When you get fencing quotes, discuss how that’s going to be handled.”

Materials

Modern fencing options include natural wood, composite, vinyl, aluminum, steel, chain link, wrought iron and bamboo.

Four essential factors will help narrow your choice:

❚ Purpose: privacy, secure children’s play area, keeping animals in (or out), etc.

❚ Budget

❚ Taste and style

❚ Amount of maintenance you’re willing to put into the finished product: eg. painting a wood fence

To illustrate: Though chain link is a cheap way of fencing in a yard, it may clash with the style of your home ... and doesn’t quite cut it as privacy fencing or a noise barrier.

Landscaping

Plan a fence that will work with your landscape and hardscape (existing or future). Consider whether you’d like to bring in heavy equipment, perhaps to pour a concrete patio. That should obviously be done before you have the fence installed.

Talk with your lawn sprinkler company to decide whether equipment will have to be repositioned. You do not want your new fence to be in the path of the lawn sprinkler spray.

Openings

How many gates will you need? Count on installing two minimum or possibly more - for example, if your driveway will pass through the fence. At least one opening should be wide enough for outdoor necessities like garbage cans or snow blowers.

Must-know numbers

❚ Cost of fencing in a yard: $1-45 per linear foot depending on type of material (not including labor).

❚ Cheapest fence material: wire and electric (invisible) both start at $1 per linear foot.

❚ Priciest fence material: composite such as Trex ™; upscale styles cost as much as $45 a linear foot.

❚ Fence height: generally 3-foot limit for front yard; 6 feet elsewhere on your property (pool fences have special regulations).

❚ Fencepost feet apart.

❚ One-call number digging: 811.

spacing: barbed fencing

maximum

8

to phone before