Borates effective in treating lumber
Tim Carter
Q: Is there a safe, do-it-yourself way to prevent wood from being destroyed by wood rot and insects? I'm chemically sensitive and don't want to rely on the normal treated lumber from lumber yards.
A: I have good news for you. A very safe process does exist to treat lumber so it's not so tasty to bothersome insects and wooddestroying fungi.
It's been known for a long time that borate treatment of wood does an amazing job of preventing wood rot. Insects find wood that contains borates about as tasty as you find 100 percent cocoa.
The borate powder dissolves easily in water. You simply soak the lumber in the borate solution. Most people just build a trough using 6-mil plastic sheeting. The different borate chemicals come with instructions about how to mix the powder with water and how long to soak the lumber.
If the lumber has painted ends as used to be the standard, you might want to cut off a thin wafer to expose the fresh, unpainted end grain. It's important to realize that the cellular structure of trees and lumber is much like very long drinking straws that are bunched next to one another running up the entire tree. The borate chemicals are drawn far up into the lumber through the end grain.
Two soaking treatments are better than one in almost all cases. The wood needs to be stacked in the shade The wood rot on this porch could have been delayed considerably with a safe borate treatment. with thin strips of wood between the layers so it can dry. Once they are dry, you can paint the lumber or stain it on all sides and edges before it's installed.
The borate treatment has a significant drawback. The borates can be leached from the lumber if you leave it outdoors. It's an excellent treatment for lumber that's going to be used to build a home covered with a roof and any lumber that won't get wet, as would a deck or other outdoor structure.
I'd highly recommend this process for all lumber that's used to frame a floor above a crawlspace.
Q: Can you settle a disagreement? I told my wife it's a good idea to build a shed on a slab larger than the shed. This provides a concrete walkway around the shed and I can lean tools up against the shed, keeping them out of the dirt.
My spouse thinks my plan is foolhardy. She maintains that driving rain could leak under the wall into the shed. She also thinks the wood walls and siding of the shed will rot faster.
A: Building a shed or any other building on a slab that's larger than the outer walls of the structure is a bad idea. Oh, I'm sure you can make all sorts of arguments about amazing caulks that would stop leaks, slanting the exposed concrete so it drains and other flimsy debate points.
The art of keeping water out of buildings is ancient. My guess is builders thousands of years ago looked at how animals stayed dry. There's a reason the feathers of birds overlap in a certain way.
Your roof shingles overlap one another to shed water. Clapboard siding overlaps one on top of another to do the same. The first piece of siding material on your shed should overlap the outer edge of the concrete slab so no water leaks under the wall.