Footbridge collapses onto busy highway, crushes 8 vehicles
MIAMI » A pedestrian bridge that was under construction collapsed onto a busy Miami highway Thursday afternoon, crushing vehicles beneath massive slabs of concrete and steel and killing at least four people, authorities said.
Search-and-rescue crews worked into the night, using dogs, search cameras and sensitive listening devices in a frantic search to find survivors among the debris.
“Everybody is working hard to make sure we rescue anyone who can be rescued,” Florida Gov. Rick Scott said.
But Miami-Dade police director Juan Perez said hopes were dwindling as the hours passed.
“We know that there’s going to be a negative outcome at the end of the day,” Perez said.
Four people were found dead amid the chaotic scene, and nine victims were taken “early on” to hospitals, Fire Chief Dave Downey said without elaborating on their conditions.
The partially built 950ton (860-metric ton) bridge had been assembled by the side of the highway and moved into place Saturday to great fanfare. The span stretched almost 200 feet (60 meters) to connect Florida International University with the city of Sweetwater. It was expected to open to foot traffic next year.
“This bridge was about goodness, not sadness,” said FIU President Mark Rosenberg. “Now we’re feeling immense sadness, uncontrollable sadness.”
Scott said an exhaustive investigation will uncover “why this happened and what happened,” and he vowed to hold accountable those responsible.
National Transportation Safety Board chairman Robert Sumwalt III said a team of specialists was heading to Miami on Thursday night to investigate.
Jacob Miller, a senior at FIU, was visiting a friend in a dorm when he heard sirens and horns honking. He went to a balcony and could see rubble coming down.
“I saw there were multiple cars crushed under the bridge. It was just terrible,” he said.
An accelerated construction method was supposed to reduce risks to workers and pedestrians and minimize traffic disruption, the university said.
Renderings of the finished bridge showed a tall, off-center tower with cables attached to the walkway to support it. When the bridge collapsed, the main tower had not yet been installed, and it was unclear what the builders were using as temporary supports.
Robert Bea, a professor of engineering and construction management at the University of California, Berkeley, said it’s too early to know exactly what happened, but the decision to use what the bridge builders called an “innovative installation” was risky, especially because the bridge spanned a heavily traveled thoroughfare.
“Innovations take a design firm into an area where they don’t have applicable experience, and then we have another unexpected failure on our hands,” Bea said after reviewing the bridge’s design and photos of the collapse.
Sweetwater police Detective Juan Llera was in a nearby meeting when the bridge collapsed.
“I heard a ‘boom’ like a bomb had exploded,” he said. “At first I thought it was a terrorist attack.”
He said he saw three injured construction workers. One had a head injury and was passing in and out of consciousness, another one had a leg injury leg and the third was lying on the street unconscious. Llera started performing CPR on him.
“We were able to keep him alive to send him to the hospital,” Llera said.
Kendall Regional Medical Center received 10 injured people. Of those, two were in “extremely critical” condition and eight were stable with injuries such as broken bones, bruises and abrasions, said Dr. Mark McKenney, the hospital’s director of general surgery.
Of the two more serious cases, one arrived in cardiac arrest but was revived. The other had a serious brain injury, McKenney said.
The main companies behind the $14.2 million construction project have faced questions about their past work, and one was fined in 2012 when a 90-ton (80-metric ton) section of a bridge collapsed in Virginia.